Double Chin Cryolipolysis Slimming Machine 110V 220V

Double Chin Removal cryotherapy slimming machine Belly Fat Reduction

Cryotherapy Slimming Machineadvantages:

The Cryotherapy Slimming Machine whole treatment course is very cool and comfortable, safe, painless, non-invasive, non-surgical, no needles, no incisions, and no recovery time.

It takes very little time for treatment without break, and after treatment, you can return to normal activities immediately.

Cryotherapy Slimming Machine  indications

Would like lose localized fat

Waist and abdomen dewlap

Postpartum localized fat

Preparations Before Operation

1) Recommended treatment parts: the upper arm, back, abdomen, love handle, leg and buttock;

2) Measure fat thickness of treatment part;

3) 10-60min; Set treatment time 10-60min based on fat thickness of treatment area;

4) Treatment area should be kept small; a large patch of treatment area could be divided into several small parts.

5) Number of treatment parts for each time should be below 2. The same treatment areas should not take second treatment within 2 months. Different treatment areas can take second treatment after 1 month. Then extra fat thickness can be reduced and burden of metabolism decreased.

6) Generally, it is suggested to carry out treatment based on provided clinical parameters, temperature range is from 0℃ to -8℃; if the operator is a professional doctor, temperature can be adjusted combining relevant factors. The temperature should not be below -8℃.

Treatment Process

1)  Check whether patient’s heartbeat is normal and consult whether he or she has other contraindications (for detailed information, see 5.2 contraindications);

2)  Measure fat thickness of treatment part ;

3)  Clean treatment part;

4)  Mark treatment area;

5)  Unpack small packet of gelpad, and wipe handpiece edge and inside part;

6)  unpack big packet of gelpad, and apply it into treatment area.

7)  patient shall be in a sitting posture and the upper body should be kept 90 degree with thigh;

8)  Choose proper treatment handpiece based on fat thickness.

9)  Start the equipment, and operate according to device operation interface and complete parameters setting;

10)  Gently apply treatment handpiece cavity on treatment area and click button on handpiece;

11)  In order to make sure that handpiece is closely touched on treatment areas, press it and lightly swing it up and down and then fix the handpiece.

12)  Click the button on the handpiece, start treatment.